Growing Latin American Demand for Polyethylene Far Outstrips its Production and Planned Additions, but New U.S. Capacity Can Help, IHS Says

Region will import approximately 50 percent of its polyethylene requirements by 2025

Thursday, May 26, 2016 5:00 am EDT


"This lack of future PE capacity expansion in Latin America has been caused by the lack of competitiveness of regional feedstock resources compared to U.S. shale-based production, combined with the region’s reduced access to financing, which in turn, resulted from the global economic crisis"

HOUSTON (May 26, 2016) – Demand for polyethylene (PE), the key raw material for plastics production, is growing in Latin America thanks to an expanding middle class, but the region’s current and planned PE capacity will continue to fall short of demand, driving the region to import approximately 50 percent of its PE needs by 2025, according to a new study by IHS (NYSE:IHS), the leading global source of critical information and insight.    

Demand for PE (in all forms) in Latin America currently exceeds 7 million metric tons (MMT), IHS Chemical has found. However, the region currently has a net deficit of more than 3 MMT of polyethylene, and by 2025, the region’s PE net deficit will approach 5 MMT, according to the IHS Chemical Special Report: Latin American Polyethylene Market: Supply Shortfalls, the Growing Opportunity.

“Today, as a region, Latin America does not currently produce enough polyethylene to meet its needs, and is facing a supply deficit that is only going to increase during the next decade,” said Raul Arias Alvarez, senior director of consulting at IHS Chemical and lead author of the special report. “This lack of future PE capacity expansion in Latin America has been caused by the lack of competitiveness of regional feedstock resources compared to U.S. shale-based production, combined with the region’s reduced access to financing, which in turn, resulted from the global economic crisis”


As a result, the PE imbalance will be sustained and will increase as the economy starts to improve, further driving plastics demand in the region, Arias Alvarez said. Inevitably, he said, PE imports will have to increase to meet demand.


The IHS Chemical special report on the Latin American polyethylene market goes beyond the contents of the consultancy’s traditional annual IHS Chemical Polyethylene World Analysis, to include insight gained in multiple conversations with plastics converters in the region, as well as to provide an additional view of the market, by end-use segment, such as packaging and agriculture, etc. The report also looks into specific polyethylene type preferences in the region (co-monomer and catalysts used in linear low density polyethylene resins), pinpoints the main centers for consumption within the region, and provides listings of the top consumers, Arias Alvarez said.

Home to approximately 634 million people, including a large, youthful population, “Latin America is expected to see its GDP decline 0.7 percent in 2016, IHS said, but should recover thereafter, driving greater consumer demand for a host of durable goods that are made from plastics,” said Rafael Amiel, director of economics for IHS Global Insight, and a contributing author for the IHS Chemical PE special report.

In 2017, the region will benefit from a less pronounced recession in Brazil as policy makers and politicians there partially agree on measures needed to fix the economy, Amiel said. “Commodity prices and external demand will no longer be a drag on growth for most economies in the region, so we at IHS expect a soft recovery will take place, driven by domestic consumption and investment. This growth in consumption demand will directly impact demand for plastics made from PE.”

To meet its growing needs for chemicals and plastics, the region will not have to look far, the IHS report said, since its U.S. neighbor will be adding more than 100 million metric tons (MMT) of new petrochemical capacity by 2025, including approximately 8 MMT of PE capacity during the next five years. Globally, PE expansions will reach nearly 24 MMT during the 2015 to 2020 timeframe.


Brazil is the biggest market for PE in the region, representing 36 percent of demand, followed by Mexico at 26 percent. Argentina follows with 10 percent of regional plastics demand, then Colombia and Chile both at 5 percent, IHS said.


High-density polyethylene (HDPE) is the most-consumed polyethylene type in the region, representing 43 percent of total PE demand. Known for its strength and durability, HDPE is used in numerous, diverse, applications including plastic bags and bottles (milk, laundry detergent), piping and construction materials, as well vehicle gas tanks. Linear LDPE or (LLDPE) is known for its flexibility and stretchiness, which makes it ideal for use in plastic wrap and stretch wrap, as well as toys and other applications. LLDPE is currently driving 31 percent of the PE market demand in Latin America. Low-density polyethylene (LDPE) represents the smallest segment at 26 percent of PE consumed. LDPE is used primarily for plastic bags, packaging and other applications.


Film and sheet applications, which is key to the packaging sector, is the most important plastics use segment in the region, representing more than 60 percent of plastics demand.


“Even though film and sheet growth has been relatively modest, its magnitude has been a key factor in generating PE growth in the region, in part because it is essential to the region’s agricultural and livestock production and exports,” said Arias Alvarez. “As our report partner, MaxiQuim, has verified, in Brazil, in particular, this agricultural sector has played a significant part in the nation’s GDP in recent years and was among the highest performing industries in Brazil in 2015.”  


Blow molding is a manufacturing process that creates hollow plastic components. This segment represents 16 percent of PE demand in Latin America, while injection molding accounts for 11 percent of polyethylene demand in the region, IHS said.


In terms of capacity, PE production exists in only five countries in the region: Argentina, Brazil, Colombia, Mexico and Venezuela. In April 2016, Braskem/IDESA initiated production of ethylene and PE at their Ethylene XXI project in Mexico, however, IHS does not anticipate other large grassroots projects for ethylene or PE to start in the region through 2020. “Down the road,” Arias Alvarez said, “there is opportunity for the region to invest in domestic PE production, particularly in countries like Argentina, which has a good industrial base, and the luxury of shale resources that may bring new light to its energy future, revitalizing its petrochemical industry.”


To speak with Raul Arias Alvarez or Rafael Amiel, please contact For more information regarding IHS Chemical Special Report: Latin American Polyethylene Market: Supply Shortfalls, the Growing Opportunity, contact


About IHS (

IHS (NYSE: IHS) is the leading source of insight, analytics and expertise in critical areas that shape today’s business landscape. Businesses and governments in more than 140 countries around the globe rely on the comprehensive content, expert independent analysis and flexible delivery methods of IHS to make high-impact decisions and develop strategies with speed and confidence. IHS has been in business since 1959 and became a publicly traded company on the New York Stock Exchange in 2005. Headquartered in Englewood, Colorado, USA, IHS is committed to sustainable, profitable growth and employs nearly 9,000 people in 33 countries around the world.

IHS is a registered trademark of IHS Inc. All other company and product names may be trademarks of their respective owners. © 2016 IHS Inc. All rights reserved.

If you prefer not to receive news releases from IHS, please email

To read our privacy policy, click here.


All Industries
IHS Media Relations, +1 303 305 8021
Chemicals; Energy; Natural Resources
Melissa Manning, +1 832 458 3840